Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems.
Wireless, Ethernet and VPN are also protected by various protection systems. The latest ('Version 3') DrayTek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules and restrictions to suit multi-departmental organisations. The Vigor 2830 now also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN. In addition, QoS (Quality of Service Assurance) can now be selectively applied to specific users.The Vigor 2830 now supports IPv6 - the successor to the current IPv4 addressing system that has been used since the Internet was first created. IPv4 address space is full up and IPv6 allows for much more efficient routing and a larger address space. IPv6 is supported both from your own ISP, but if your ISP does not (yet) support IPv6, the Vigor 2850 also supports IPv6 broker/tunnel services to provide IPv6 access using either TSPC or AICCU via 3rd party IPv6 providers. To learn all about IPv6, you can get our book here. IPv6 on the Vigor 2830 provides the following features.
Operation on any one of the WAN ports (WAN1 ADSL, WAN2 Ethernet or 3G). Connectivity to direct native IPv6 ISPs. Built-in tunnelling to 3rd party IPv6 brokers supporting TSPC or AICCU methods. Default stateful firewall for all IPv6 LAN Clients/Devices. DHCPv6 Client or Static IPv6 Client.
DHCPv6 & RADVD for client configuration. QoS for IPv6 with DiffServ. Router Management over IPv6 (Telnet/HTTP) with IPv6 Access List.
Simultaneous (concurrent) operation with IPv4 ("Dual-Stack"). Other router features are available on IPv4 only currently. Triple-WAN Load Balancing & Backup. As well as the primary ADSL (WAN) interface, the Vigor 2830 features two other WAN connections. WAN2 is Ethernet (Gigabit) and WAN3 is a USB port for connection of a 3G/4G USB modem.WAN2 (Ethernet) can connect to a second ADSL modem e. , a cable modem or any other Ethernet-based Internet feed. The multiple WAN interfaces can be used either for. WAN-Backup provides contingency (redundancy) in case of your primary ADSL line or ISP suffering temporary outage. Internet Traffic will be temporarily routed via the secondary Internet access. When normal services is restored to your primary ADSL line, all traffic is switch back to that. If you don't have ADSL, the Ethernet WAN port can instead be used as your primary/only Internet connection (using NAT) so the same router can be used for either ADSL or Ethernet Internet connections.
The USB port provides Internet connectivity (main, backup or load balanced) by connecting to a compatible USB modem (or cellphone) for access to the high speed. From UK providers such as Vodafone, T-Mobile, Orange, 3 and T-Mobile.If you don't have ADSL at all, the USB/3G access method can be used as your primary/only Internet connection, ideal for temporary locations, mobile applications or where broadband access is not available. See seaprates page for more details on 3G. Vigor 2830 Series - Technical Specification. 4 X Gigabit Ethernet (1000Mb/s) Ports. ANFP Issue 3 Compliant/Certified (for Annex A & Annex M). Secondary WAN Port : Gigabit (1000Mb/s) Ethernet for load balance and WAN failover. USB Port for 3G Cellular Modem or Printer.
Vigor 2830 ATM Protocols (DSL). RFC-2684/RFC-1483 Multiple Protocol over AAL5. PPPoE/PPPoA Relay (ADSL Bridge; feature due Autumn 2009 ETA). Multiple PVC support for Triple Play Applications (up to 8 simultaneous). Wireless LAN Features ('n' Models Only).
MIMO Technology with three aerials (2T3R). Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined). Packet Aggregation and Channel Bonding.
Compatible with 802.11b and 802.11g Standards. Active Client list in Web Interface. Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces). Restricted access list for clients (by MAC address). Time Scheduling (WLAN can be disabled at certain times of day).WDS (Wireless Distribution system) for WLAN Bridging and Repeating. 802.11e WMM (Wi-Fi Multimedia). Wireless LAN Features ('n plus' Models Only). 802.11n Switchable Dual-Band (2.4Ghz or 5.8Ghz). Protocols: SIP, RTP / RTCP.
12 SIP Registrar Accounts (for up to 12 VoIP providers). Line port for PSTN Passthrough (integrates POTS line).
Auto-fallback to PSTN under power/Internet failure. 711 A / µ Law.
Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress. DTMF Transmission: In Band / Out Band (RFC-2833) / SIP info.FAX / Modem Support G. Call Waiting with Caller ID. Call Forwarding (Always , On Busy and On No Answer). Call Barring (Incoming / Outgoing).
MWI (Message Waiting Indicator) (RFC-3842). Hotline (Dial preset number when handset lifted). URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs.Block Web sites by category e. Prevent accessing of web sites by using their direct IP address (thus URLs only).
Blocking automatic download of Java applets and ActiveX controls. Blocking of web site cookies. Block http downloads of file types.Time Schedules for enabling/disabling the restrictions. Block P2P (Peer-to-Peer) file sharing programs e. Block Instant Messaging programs e. Port Redirection and Open Port Configuration.
SPI (Stateful Packet Inspection) with new FlowTrack Mechanism. Bind IP to MAC Address.
Class-based Bandwidth Guarantee by User-Defined Traffic Categories. Layer 2&3 (802.1p & TOS/DCSP).
4-level Priority for each Direction (Inbound / Outbound). Temporary (5 minute) Quick Blocking of any LAN Client.
Web-Based User Interface (HTTP / HTTPS). CLI (Command Line Interface) / Telnet / SSH.
Firmware Upgrade via TFTP / FTP. SNMP v2 & v3 management with MIB-II. Up to 32 Concurrent VPN Tunnels (incoming or outgoing).Tunnelling Protocols: PPTP, IPSec, L2TP, L2TP over IPSec. IPSec Main and Agressive modes.
Encryption : MPPE and Hardware-Based AES / DES / 3DES. Authentication : Hardware-Based MD5 and SHA-1. IKE Authentication : Pre-shared Key or X. DHCP Client / Relay / Server. NTP Client (Syncrhonise Router Time).
Call Scheduling (Enable/Trigger Internet Access by Time). Rack Mountable (Optional Vigor 2830 mounting bracket required).
Power Consumption: 18 Watt Max. Dimensions: L240.96 W165.07 H43.96 (mm). Operating Power: DC 15V (via external PSU, supplied). VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK) who are VAT registered. The item "DrayTek Vigor 2830n Series ADSL2+ 1000Mbps Annex A Router Firewall + Aerials" is in sale since Saturday, October 14, 2017.
This item is in the category "Computers/Tablets & Networking\Home Networking & Connectivity\Wireless Routers". The seller is "itinstock" and is located in London. This item can be shipped worldwide.